Private brewery Schulz 1000 is the best solution for starting your own brewery business. The brewery allows you to produce 1000 liters of wort per brew.
The brewery consists of brewing part, fermentation department and auxiliary equipment.
The productions capacity allows brewing required amount of beer both for restaurant chains and for creating your own beer brand. We offer personal project for each brewery. Schulz equipment allows brewing beer of all styles.
According to your wishes Schulz 1000 may be produced intwo variants – restaurant type or industrial type. You can purchase a brewery by submitting online application or via phone call.
High quality of welding seam
Europe made component parts
Polishing steel to a mirror finish
More than 100 implemented projects
Mandatory test before shipment to a customer
Developing individually for each client
Two-roller malt mill is designed for grinding of malt. It has a storage bin capacity of 16 liters, the ability to adjust the bite between the rollers. Rotation of the rollers carried out by belt gearing, driven by an electric motor. Power consumption: 0.75 kW, 380V, 50 Hz.
It is designed for mashing and boiling of wort with hops. It has a mixing machine, driven by an electric motor (P = 1.1 kW, 380V). The device has heating steam jacket which covers the lower part of the device and its bottom. Mash Tun is thermally insulated with urethane plastic foam. Temperature sensor located in the cylindrical part of the apparatus. Operating volume of the machine is 1000 liters, total - 1250 liters.
It is intended for filtration of mash - separation of its solid (grains) and liquid (wort) phases. Also, this unit is designed for separation of hot break. Filtration is carried out through removable sieve, consisting of several individual segments. It’s also has a ripper, driven by an electric motor (P = 1.5 kW, 380V). The device is thermally insulated with urethane plastic foam. The apparatus has a rectangular hatch in the cylindrical part for unloading grains. Operating volume of the machine is 1000 liters, total - 1250 liters.
Electrical anodic steam generator is intended to heat mash tun with superheated steam. Productivity: up to 120 kg of steam / h. Power Consumption: 84 kW, 380V , 50 Hz
It’s intended for pumping of mash and wort between devices of brewing line (mash tun and lauter tun – whirlpool) at different stages of brewing process and pumping the finished cold hopping wort into CCT for fermentation. Power consumption: 0.75 kW, 380V, 50 Hz. Capacity: up to 8 m3 / h.
Cooling pump №1 is intended for circulation of refrigerant coolant solution from the collecting tank for cooling in the refrigeration aggregate. Power consumption: 0.75 kW, 380V, 50 Hz Productivity of 4m3 / hour. Head up of 40 m. Cooling pump №2 is intended for supplying CCT and heat exchanger with refrigerant coolant from the collecting tank. Power consumption: 0.75 kW, 380V, 50 Hz Productivity of 8m3 / hour. Head is up of 30 m.
Hot water tank pump made for a circulation of hot water and feeding in to brewing part. Power Consumption: 0,75 kW,380V,50Hz. Productivity up to 4m3 / hour. Water pressure up to 40m.
System consist of : aeratoe (saturation candle) DN32, system of sterile filters (5 levels of air cleaning) and oil free compressor.Volume of compressor’s receiver 24 PRessure 8 bar.Productivity 100l/min. Power consumption: 1,5 kW, 220V, 50 Hz.
Control panel №1 is intended for control of all brewing processes, namely: on/off engines of mash tun and lauter tun – whirlpool, wort pump and operation of refrigeration system in automatic mode. Device chassis is made of stainless steel. There are temperature control devices on the front panel: temperature control of mash tun , temperature of coolant (propylene glycol) and temperature of wort after colling. Also control panel №1 has two frequency converters – engine of wort pump and engine of lauter tun – whirlpool.
Boiler is intended for heating water to T = 78 ° C, which is used to cover the sieve before filtration in lauter tun (deaeration of space beneath the sieve) and washing of grains. The volume is 700 liters. Heatig by TH (3 p. 4,5 kW each). Power consumption: 13.5 kW, 220 V, 50 Hz.
It’s double circuit plate heat exchanger. It is intended for cooling of wort before it pumping into CCT for fermentation. The cooling in the primary circuit is carried out with cold water and with the refrigerant in the second one.
Cylindrical-conical tank (CCT) is intended for fermentation and after-fermentation processes, and it also can be used as storage tanks for finished beer. It has a helical cooling system. Refrigerant - 40% propylene glycol. The device is thermally insulated with urethane plastic foam. Cylindrical-conical tank has a hatch in the upper cap. Temperature sensor is located in the cylindrical part. It also has 3 nipples – nipple for getting beer sample, nipple for dumping of yeast and nipple of CO2. Dowel machine with pressure gauge is situated on the CO2 nozzle. At the top of the device is installed cleaning head (CIP). The working volume of the unit is 2000 l, total - 2400 l.
Control panel №2 (cylindrical-conical tank) is intended for automatic temperature control in CCT with the help of controllers that are located on the front panel. The framework of control panel is made of stainless steel. Power consumption 1.0 kW, 220V
Cooling unit is intended for cooling of refrigerant solution, which cools is in turn the second circuit of heat exchanger and cylindrical-conical tank. Freon R134a kW is a compressor-condensing unit, mounted on the frame. It has all the necessary protection and automation systems: flow relay, pressure relay and crankcase heater. Power consumption: 4.5 kW, 380V, 50 Hz. Cooling capacity 9.0 kW
It is intended for CIP-washer for cylindrical-conical tank. Power consumption: 0.75 kW, 380V, 50 Hz. Capacity up 4m3 / hour. Head is up to 40 m.
Mini Lab includes: refractometer, alcoholometer, dropper for iodine. The Brewer’s set includes: technological spanner for connecting thread, ladle for sampling, scoop for unloading the grains
Device is designed for washing kegs of 30 and 50 liters. Consists of two departments,100l. Volume each,each has an automatic maintaining of desired temperature(heating by TH),pump, control panel,which are mounted on support frame.Has a union for connecting steam generator,for sterilizing of kegs by steam.Power Consumption 4,5 kW,380V. Productivity 12 kegs/hour.