+38 044 229 70 02
+38 098 321 10 01
Kiev, Peremohy Ave., 118


+7 495 721 49 47
+7 968 879 75 15
Moscow region, Ivanteevka, 1 Factory passage


+7 727 380 81 69
Almaty, Suyunbay ave., 211


+48 123 766 555
31-752, Poland, Krakow, 2 Blokova str.
Make a request

Find out the cost

Mini breweries Schulz 100 is the set of brewing equipment which produces 100 liters of wort per brew. Due to relatively small volumes of brew, the brewery is popular among small pubs and restaurants.

Brewery consists of brewing part, fermentation department and auxiliary equipment.

Mini brewery attracts a new customers usually is installed in a good overlooked place. You can purchase a brewery by submitting an application online or via phone call.


+ 38 098 321 10 01


Technical specifications of brewery Schultz 100
Capacity at 8 CCT, maturation 21 days
2285 l / month; 76 l / day
26 м2
Power consumption, kW
18 kW; 380V; 50 Hz
Water consumption
9,1 м3/month; 0,3 м3/day
6,4 м3/month; 0,22 м3/day
gallery of schulz 100
Why SCHULZ for a hundred liters?

High quality of welding seam

Europe made component parts

Polishing steel to a mirror finish

More than 100 implemented projects

Mandatory test before shipment to a customer

developing individually for each client

Equipment set Schulz 100
Malt Mill

Two-roller malt mill is designed for grinding of malt. It has a storage bin capacity of 16 liters, the ability to adjust the bite between the rollers. Rotation of the rollers carried out by belt gearing, driven by an electric motor. Power consumption: 0.75 kW, 380V, 50 Hz.

Mash Tun

It is designed for mashing and boiling of wort with hops. It has a mixing machine, driven by an electric motor (P = 0.17 kW, 380V). The device has heating steam jacket which covers the lower part of the device and its bottom. Mash Tun is thermally insulated with urethane plastic foam. Temperature sensor located in the cylindrical part of the apparatus. Operating volume of the machine is 100 liters, total - 150 liters.

Lauter Tun – Whirlpool

It is intended for filtration of mash - separation of its solid (grains) and liquid (wort) phases. Also, this unit is designed for separation of hot break. Filtration is carried out through removable sieve, consisting of several individual segments. It’s also has a ripper, driven by an electric motor (P = 0.17 kW, 380V). The device is thermally insulated with urethane plastic foam. The apparatus has a rectangular hatch in the cylindrical part for unloading grains. Operating volume of the machine is 100 liters, total - 150 liters.

Steam generator

Electrical anodic steam generator is intended to heat mash tun with superheated steam. Productivity: up to 20 kg of steam / h

Wort pump

It’s intended for pumping of mash and wort between devices of brewing line (mash tun and lauter tun – whirlpool) at different stages of brewing process and pumping the finished cold hopping wort into CCT for fermentation. Power consumption: 0.55 kW, 380V, 50 Hz. Capacity: up to 6 m3 / h.

Cooling pumps

Cooling pump №1 is intended for circulation of refrigerant coolant solution from the collecting tank for cooling in the refrigeration aggregate. Power consumption: 0.75 kW, 380V, 50 Hz Productivity of 4m3 / hour. Head up of 40 m. Cooling pump №2 is intended for supplying CCT and heat exchanger with refrigerant coolant from the collecting tank. Power consumption: 0.75 kW, 380V, 50 Hz Productivity of 8m3 / hour. Head is up of 30 m.

Control panel №1 (brewing line)

Control panel №1 is intended for control of all brewing processes, namely: on/off engines of mash tun and lauter tun – whirlpool, wort pump and operation of refrigeration system in automatic mode. Device chassis is made of stainless steel. There are temperature control devices on the front panel: temperature control of mash tun , temperature of coolant (propylene glycol) and temperature of wort after colling. Also control panel №1 has two frequency converters – engine of wort pump and engine of lauter tun – whirlpool.


Boiler is intended for heating water to T = 75 ° C, which is used to cover the sieve before filtration in lauter tun (deaeration of space beneath the sieve) and washing of grains. The volume is 100 liters. Power consumption: 2.0 kW, 220 V, 50 Hz.

Plate heat exchanger

It’s double circuit plate heat exchanger. It is intended for cooling of wort before it pumping into CCT for fermentation. The cooling in the primary circuit is carried out with cold water and with the refrigerant in the second one.


Cylindrical-conical tank (CCT) is intended for fermentation and after-fermentation processes, and it also can be used as storage tanks for finished beer. It has a helical cooling system. Refrigerant - 40% propylene glycol. The device is thermally insulated with urethane plastic foam. Cylindrical-conical tank has a hatch in the upper cap. Temperature sensor is located in the cylindrical part. It also has 3 nipples – nipple for getting beer sample, nipple for dumping of yeast and nipple of CO2.

Control panel №2 (cylindrical-conical tank)

Control panel №2 (cylindrical-conical tank) is intended for automatic temperature control in CCT with the help of controllers that are located on the front panel. The framework of control panel is made of stainless steel. Power consumption 1.0 kW, 220V

Cooling unit

Cooling unit is intended for cooling of refrigerant solution, which cools is in turn the second circuit of heat exchanger and cylindrical-conical tank. Freon R134a kW is a compressor-condensing unit, mounted on the frame. It has all the necessary protection and automation systems: flow relay, pressure relay and crankcase heater. Power consumption: 1.85 kW, 380V, 50 Hz. Cooling capacity 3,8

Mobile CIP-Unit

It is intended for CIP-washer for cylindrical-conical tank. Power consumption: 0.75 kW, 380V, 50 Hz. Capacity up 4m3 / hour. Head is up to 40 m.

Mini Lab and Brewer’s set

Mini Lab includes: refractometer, alcoholometer, dropper for iodine. The Brewer’s set includes: technological spanner for connecting thread, ladle for sampling, scoop for unloading the grains

name of equipment
name of equipment
1. Malt Mill
11. CCT
2. Mash Tun
12. Control panel №2 (CCT)
3. Lauter Tun - Whirlpool
13. Refrigerating unit
4. Pipelines and isolation valve of brewing line (including hop separator)
1 set
14. Cooling pump
5. Steam generator
15. Automatic cooling system (solenoid valves, temperature gages)
1 set
6. Wort pump
16. Mobile CIP-pump
7. Working platform (decorative table)
17. Mini Lab and brewer set
1 set
8. Control panel №1 (brewing line)
18. Hoses of fermentation room
1 set
9. Boiler
19. Device for filling kegs
10. Plate heat exchanger
*The equipment for cleaning
and preparation
of water not included in the
equipment kit
Request a quote here to get brewing equipment pricing today