Contacts

Ukraine

+38 044 229 70 02
+38 098 321 10 01
Kiev, Peremohy Ave., 118
info@schulz-brewery.com

Russia

+7 495 721 49 47
+7 968 879 75 15
Moscow region, Ivanteevka, 1 Factory passage
rf@schulz-brewery.com

Kazakhstan

+7 727 380 81 69
Almaty, Suyunbay ave., 211
kz@schulz-brewery.com

Poland

+48 123 766 555
31-752, Poland, Krakow, 2 Blokova str.
info@schulz-brewery.com
Make a request

The cost of keg-washing Schultz from 7280 $

Kegs are becoming increasingly popular packaging, especially in spring and summer.Kegs allows to organize the delivery of beveragein a sellingpoint with minimal cost(usually this: beer, kvass, wine). We offer apparatus for dispensing beer, kvass, wine in kegs with different performance.

WE WILL HELP YOU TO SELECT A BREWERY COVERED BY WARRANTY FAST . CALL US

+ 38 098 321 10 01

OR SEND YOUR ONE-CLICK APPLICATION ON THE WEBSITE

Why SCHULZ

High quality welded seams

Czech made regulated isolation valve

Self-made barrel drainage

Operating pressure up to 2 bar

Compulsory testing in workshop before shipment

developing individually for each client

High quality materials and components of known manufacturers used for the production of the device:

  • Supportframe, tank of cleaning solution, binding – Stainless steel AISI 304
  • Control board IP54 – Stainless steel AISI 304
  • Pump – Calpeda (Italy)
  • Controllerand control panel – Siemens (Germany)
  • Pneumatic control system – Camozzi (Italy)
  • Valves with pneumatic control – Camozzi (Italy)

Keg-washer is fully assembled. The device is completely ready for operation after the connection with a water and air(steam).

In addition to keg-washer you can buy integrated steam generator

Technical characteristics of keg-apparatus capacity of 20 kegs / hour
name of equipment
value
1
Productivity
20 - 60 kegs / hour
2
Number of line items
1-3
3
Type of cleaning fittings
customer-specific
4
Material
steel AISI 304
5
Pump type
MXH 403
6
Control board type
IP54
7
Established capacity
12 kW
8
Recommended cross section of supply cable
4x4 mm2
9
Rated voltage
50 Hz± 4%
10
Overall dimensions
1750 x 2050 x 1490
11
Operating pressure
5 MPa
12
Loudness
≤85 dB(А)
Electricity. Requiredminimumparameters
1
Input
380W 50Hz, 16A
2
Tubular electric heater
1,5 – 3,0 kW
3
Pump
750 W
4
Control panel
380W
Automatic keg-washer Semi-automatic keg washer
Control
Keg washing process is completely automatic which excludes the human factor. It is possible to choose the washing mode on the control panel (rapid washing, usual), which controls the level of liquid and temperature in a vessel. Keg washing process is carried in manual mode. There are few buttons on the control panel, with the help of which the operator controls keg washing process and the temperature of washing liquid.
Construction
There are two vessels in the construction (for prepared water and caustic soda) + washing with running water. There is one vessel in the construction (caustic soda) + washing with running water.
Productivity
20 kegs/hour (possibility of changing the cycle) Depending on operator
Washing quality
Complies with all sanitary standards Depending on operator
Guarantee
18 months 12 months
The device performs the following operations:
  • Outcome of the rest of beverage
  • Washing with a cold water
  • Steam sterilization - customer-specific
  • Outcome of gas pressure
  • Washing with a prepared water or acid
  • Filling with CO2

It is very important for any manufacturer to get the properties and quality of manufactured product for the costumer. Attention to such important process as preparing of packing materials affects both the taste and the quality of beverages. This factor has a positive effect on market loyalty to manufacturer company and ultimately to the product demand from consumers.

Request a quote here to get brewing equipment pricing today